Due to the limiting structural conditions on site, it was not possible to use a crane to lift the truck weighing platform. Therefore, the Minebea Intec technicians used a differential pulley to push the weighing platform into the discharging station.

Thanks to the digital auxiliary technology of the Pendeo^? truck scale load cells, commissioning became very simple and straightforward. The Maxxis 5 weight controller was integrated to the customer’s system to signal when the target weight is reached. In addition, the weight controller can easily identify eight load cells under each platform and monitor their status to ensure process safety.

After installation, Minebea Intec also helped New Hope Group pass calibration. The local metrology office performed the off-center error, linearity, and full scale tests without any problems. All parameters met the metrological requirements and the label for legal trade use was issued immediately.